RSS-R Rebar stress sensor
Monitors strain in reinforced-concrete reinforcement. Incorporated into the rebar cage by welding or couplings.
Application and connection
Made from the same material and diameter as the reinforcement, so installation as part of the cage does not reduce the rebar strength. The sensor experiences the same stresses as the reinforcement, reducing measurement error.
It can also be tied or welded to the cage. In this arrangement a smaller-diameter sensor minimizes its influence on the cage stress and strain state. Available with a 350 Ω analog strain gauge bridge or a digital output.
Technical documentation
Operating manual (RU)On the manufacturer’s website (RU)Technical specifications
- Output
- Analog
- Installation method
- Welding / couplings
- Nominal rebar diameter
- D16-50
- Primary transducer type
- 350 Ω strain gauge bridge
- Length
- 1000 mm
- Calibration type
- Strain calibration
- Measurement range
- ±2500µm/m
- Basic error relative to full measurement span
- 1%
- Temperature compensation
- Available
- Operating temperature range
- -40…+60 °C
Key manufacturer data is shown. Range, interfaces, and supplied components depend on the selected version.
Full manufacturer data (RU)Let’s discuss your task
Tell us about the facility, the current system, and what needs to change. We will clarify the details and suggest the next step.